ASAD-Advanced Driving Assistance System Analysis
ADAS (Advanced Driver Assistance Systems), advanced driving assistance system. The main function of ADAS is not to control the car, but to provide information about the driver’s work and vehicle environment changes and pre-warning the possible dangerous situation, so that drivers take early measures to avoid traffic accidents occur.
Advanced Driving Assistance System (ADAS), its products include: front impact warning (FCW), front vehicle distance monitoring and early warning system (HMW), lane departure warning system (LDW), pedestrian detection and collision avoidance system (PCW) Light control system (IHC) 등등.
Front Collision Warning (FCW): FCW is active when the system is on and the speed is 0-200km / 시간, and an alarm is issued within 2.7 seconds before the collision with the front vehicle.
Pedestrian Collision Warning (PCW): The PCW is in operation at speeds of 1 km / h to 50 km / 시간, and may sound when a collision may occur with the front pedestrian.
Lane Departure Warning: The LDW is active at speeds above 55km / h and alerts when the driver inadvertently departs from the lane. If the directional light is used in the lane change, no alarm is issued.
Vehicle Distance Monitoring Warning (HMW): HMW measures the distance from the front vehicle in seconds. If you are approaching the set distance, a dangerous alarm is issued.
The Urban Forward Collision Warning (UFCW): When the distance between the object and the front bumper is less than 1.6 에게 2.0 meters (the driver can adjust the safety vehicle distance), the system will alert the imminent danger; UFCW in the 1- 30km / h is in operation.
Intelligent High Beam Control (IHC): dark road, in the absence of vehicles in the vicinity of the vehicle can be the headlamps to control, from the low beam automatically switch to high beam
Fuzhou ChuangAn Optics Co., 주식회사, earlier involved in ADAS advanced driving support system has always maintained front-end lens research and development and innovation capability, there are mature and production products. And domestic and international companies, to establish close relations of cooperation.